Mio DigiWalker™ C220 SD Card Installation.

Thank you for your purchase of the Mio DigiWalker™ C220 GPS Navigator.

In response to the overwhelming popularity of the C220 during this season’s “Black Friday” specials, our customer service team has been speaking with a number of new C220 users and has asked us to pass on a quick tip.

NOTE: The map data and navigation software for the C220 is preloaded on an SD memory card, which is also included in the original product package. Please note that this SD memory card must be installed in the device prior to use. By following the simple installation steps outlined below, you should be up and navigating in minutes!

1. Before you power on your C220, insert the SD Card firmly into the slot on the right side of the device. Make sure you hear the "click" of the SD Card to ensure it is in place. If you do not hear the "click", remove the SD Card and insert it again.
2. Once the SD card has been inserted into the device, power on your C220 by pressing and holding the power button for 10 seconds.

Thank you again for your support and we hope you enjoy a stunning array of travel adventures with your Mio Digiwalker™ GPS Navigator.